Stansteel’s Automatic AC Calibration System ensures accuracy and cost savings.

Liquid asphalt can be calibrated and weighed by a separate holding vessel that is supported on multiple load cells and calibrated with a known weight. In order to ensure the accuracy of the liquid asphalt metering system, it is mandatory that the hotmix producer runs a calibration check on their asphalt metering on a periodic basis.

With the Stansteel Automatic A.C. Calibration System with the proper piping and valving, the A.C. can be diverted from the run line on the plant directly to the A.C. calibration tank. This is loaded with a certain number of gallons and then stopped with a weight being registered on the electronic digitizer in the control house. After the material is weighed, the process can be reversed and pumped back to the AC storage tank so that no waste occurs.

Please note: It is extremely important to highlight that this is a very safe and proven way to avoid having the plant personnel trying to handle cumbersome pipes and high temperature A.C. that formerly was always accomplished by pumping into a tanker truck and taking the truck to a truck scale to check and measure (weigh) to determine the calibration. In addition, with the extreme value of liquid asphalt now, it’s important to calibrate on a more frequent basis in order to ensure accuracy and avoid wasting any extra valuable liquid A.C.